INSTALLATION - Continued
5.
Connect wiring harness quick-disconnect (Figure 4, Item 2) to harness plug (Figure 4, Item 1).
NOTE
Ensure ground strap is between washer and lockwasher.
6.
Install lockwasher (Figure 4, Item 10) and ground strap (Figure 4, Item 11) on inside left fender
(Figure 4, Item 13) with washer (Figure 4, Item 9), screw (Figure 4, Item 12), washer (Figure 4, Item 9), and
locknut (Figure 4, Item 8).
7.
Install two hood stop cables (Figure 4, Item 4) on radiator support brackets (Figure 4, Item 7) with two washers
(Figure 4, Item 6), screws (Figure 4, Item 5), washers (Figure 4, Item 6), and locknut (Figure 4, Item 3).
TM 9-2320-272-23-4
0565
0565-8