REMOVAL
1.
Remove two locknuts (Figure 1, Item 3), washers (Figure 1, Item 6), screws (Figure 1, Item 5), washers
(Figure 1, Item 6), and hood stop cables (Figure 1, Item 4) from radiator support brackets (Figure 1, Item 7).
Discard locknuts.
2.
Disconnect wiring harness quick-disconnect (Figure 1, Item 2) from harness plug (Figure 1, Item 1).
3.
Remove locknut (Figure 1, Item 8), washer (Figure 1, Item 9), screw (Figure 1, Item 12), washer
(Figure 1, Item 9), ground strap (Figure 1, Item 11), and lockwasher (Figure 1, Item 10) from inside left fender
(Figure 1, Item 13). Discard locknut and lockwasher.
TM 9-2320-272-23-4
0565
0565-2