TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 111 of 1393

REMOVAL - Continued

4.

Attach chain to hood support brackets and lifting device and raise hood

(Figure 2, Item 1) until slack is removed.

5.

Remove hood retaining bar (Figure 2, Item 2) from bumper bracket (Figure 2, Item 6) and stow on hood stowage

bracket (Figure 2, Item 6) (TM 9-2320-272-10).

6.

Remove four screws (Figure 2, Item 8), lockwashers (Figure 2, Item 7), and mounting plate (Figure 2, Item 5)

from front crossmember (Figure 2, Item 4). Discard lockwashers.

WARNING

All personnel must stand clear during lifting operations. A shifting or swinging load may cause

injury to personnel. Failure to comply may result in injury or death to personnel.

7.

Lift hood (Figure 2, Item 1) straight up and away from bumper (Figure 2, Item 9).

8.

Lower and remove hood (Figure 2, Item 1) from lifting device.

TM 9-2320-272-23-4

0565

0565-4