TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 163 of 1393

REMOVAL

1.

Remove three screw assembled washers (Figure 1, Item 9) from left fender (Figure 1, Item 10) and brushguard

(Figure 1, Item 3).

2.

Remove four nuts (Figure 1, Item 8), washers (Figure 1, Item 7), screws (Figure 1, Item 5), and wiring harness

quick-disconnect (Figure 1, Item 6) from brushguard (Figure 1, Item 3).

NOTE

When performing Steps (3) through (7), note location of clamps for installation.

3.

Remove 12 screw assembled washers (Figure 1, Item 4) and harness clamps (Figure 1, Item 1) from

brushguard (Figure 1, Item 3) and hood (Figure 1, Item 2).

4.

Remove six screw assembled washers (Figure 1, Item 12) and two upper hinge halves (Figure 1, Item 11) from

brushguard (Figure 1, Item 3).

TM 9-2320-272-23-4

0576

0576-2