TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 159 of 1393
REMOVAL
NOTE
Fender splash shield replacement is the same for both left and right side. This procedure
covers the right fender splash shield.
1.
Remove locknut (Figure 1, Item 8), screw (Figure 1, Item 6), and washer (Figure 1, Item 7) from splash shield
(Figure 1, Item 5) and support brace (Figure 1, Item 11). Discard locknut.
2.
Remove three screws (Figure 1, Item 9) and lockwashers (Figure 1, Item 10) from splash shield
(Figure
1,
Item
5) and cab extension (Figure 1, Item 12). Discard lockwashers.
3.
Remove three locknuts (Figure 1, Item 4), washers (Figure 1, Item 3), and splash shield (Figure 1, Item 5) from
screws (Figure 1, Item 2) and cab floor (Figure 1, Item 1). Discard locknuts.
M5190DAA
2
3
4
5
11
12
1
10
9
8
7
6
Figure 1.
Fender Splash Shield Removal.
END OF TASK
TM 9-2320-272-23-4
0575
0575-2
Back to Top
