TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 167 of 1393
INSTALLATION
1.
Install brushguard (Figure 4, Item 5) on hood (Figure 4, Item 4), aligning clamps (Figure 4, Item 3) on wiring
harness (Figure 4, Item 2) in proper position, with ten screw assembled washers (Figure 4, Item 6) and nuts
(Figure 4, Item 1).
M3244DAA
2
3
6
1
1
4
5
6
Figure 4.
Radiator Brushguard Installation.
2.
Install elbow (Figure 5, Item 7) on brushguard (Figure 5, Item 6) with four screws (Figure 5, Item 3), washers
(Figure 5, Item 2), and nuts (Figure 5, Item 1).
3.
Install air duct (Figure 5, Item 9) on elbow (Figure 5, Item 7) with clamp (Figure 5, Item 8).
4.
Install brushguard (Figure 5, Item 6) on right fender (Figure 5, Item 4) with three screw assembled washers
(Figure 5, Item 5).
TM 9-2320-272-23-4
0576
0576-6
Back to Top
