INSTALLATION
1.
Position lock (Figure 2, Item 6) on side panel (Figure 2, Item 2) and lock handle shank (Figure 2, Item 1) and
install washer (Figure 2, Item 7) and nut (Figure 2, Item 8).
2.
Install four lockwashers (Figure 2, Item 10) and nuts (Figure 2, Item 9) on lock (Figure 2, Item 6).
3.
Install two clevises (Figure 2, Item 4) on lock arms (Figure 2, Item 6) with two pins (Figure 2, Item 5) and cotter
pins (Figure 2, Item 3).
4.
Install cover plate (Figure 2, Item 12) on side panel (Figure 2, Item 2) with eight screws (Figure 2, Item 11).
TM 9-2320-272-23-4
0621
0621-4