INSTALLATION - Continued
4.
Install washer (Figure 2, Item 8) and nut (Figure 2, Item 7) on lock (Figure 2, Item 11) and lock handle shank
(Figure 2, Item 14).
5.
Install two clevises (Figure 2, Item 2) on locking arms (Figure 2, Item 3) with two pins (Figure 2, Item 4) and
cotter pins (Figure 2, Item 1).
6.
Install lock cover plate with insulation (Figure 2, Item 6) on side panel (Figure 2, Item 13) with eight screws
(Figure 2, Item 5).
M5348DAA
5
6
4
3
2
1
2
1
18
17
16
15
14
13
12
11
10
8
7
3
9
Figure 2.
Side Panel Rear Lock Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
Retract and secure van side panel. (TM 9-2320-272-10)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-4
0620
0620-3/4 blank