REMOVAL
NOTE
Tag wires for installation.
1.
Remove four screws (Figure 1, Item 1) and upper cover (Figure 1, Item 2) from control center box
(Figure
1,
Item
10).
2.
Remove four screws (Figure 1, Item 5) and lower cover (Figure 1, Item 4) from control center box
(Figure
1,
Item
10).
3.
Remove screw (Figure 1, Item 11) and wire (Figure 1, Item 8) from terminal (Figure 1, Item 9).
4.
Remove three screws (Figure 1, Item 3) and wires (Figure 1, Item 7) from circuit breaker (Figure 1, Item 6).
TM 9-2320-272-23-4
0660
0660-2