TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 101 of 623
INSTALLATION - Continued
WARNING
All personnel must stand clear during lifting operations. A snapped chain, or shifting or
swinging load, may result in injury to personnel. Failure to comply may result in injury or death
to personnel.
21.
Attach lifting device (Figure 26, Item 2) to lightweight weapon station platform (Figure 26, Item 3) with four
utility chains (Figure 26, Item 1) and raise approximately 12 in. (30.48 cm).
22.
Install long crossmember assembly (Figure 26, Item 8), with locator tab (Figure 26, Item 10) to left, on front of
lightweight weapon station platform (Figure 26, Item 3) with four U-bolts (Figure 26, Item 11), eight washers
(Figure 26, Item 12), and locknuts (Figure 26, Item 13). Do not tighten locknuts.
23.
Install short crossmember assembly (Figure 26, Item 7), with locator tab (Figure 26, Item 5) to left, on rear of
lightweight weapon station platform (Figure 26, Item 3) with three U-bolts (Figure 26, Item 4), six washers
(Figure 26, Item 6), and locknuts (Figure 26, Item 9). Do not tighten locknuts.
TM 9-2320-272-23-5
0775
0775-38
Back to Top
