TM-9-2320-272-23-5

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-5 - Page 143 of 623

REMOVAL

NOTE

•

Right and left European mini-lights are replaced the same. This procedure covers the

right side.

•

Note routing of leads through grommet and fender for installation.

1.

Remove two lenses (Figure 1, Item 2), o-rings (Figure 1, Item 16), and lamp (Figure 1, Item 1) from lamp

housing (Figure 1, Item 17). Discard o-rings.

2.

Remove four locknuts (Figure 1, Item 10) and protector box (Figure 1, Item 11) from four screws

(Figure

1,

Item 7) on fender (Figure 1, Item 8). Discard locknuts.

3.

Disconnect lead (Figure 1, Item 13) and cable (Figure 1, Item 9) from connector (Figure 1, Item 12).

4.

Disconnect cable (Figure 1, Item 9) from lead (Figure 1, Item 6).

5.

Remove grommet (Figure 1, Item 4) from leads (Figure 1, Items 6 and 13) and fender (Figure 1, Item 8).

6.

Remove locknut (Figure 1, Item 14), lockwasher (Figure 1, Item 15), lamp housing (Figure 1, Item 17), and

washer (Figure 1, Item 18) from brush guard (Figure 1, Item 3). Discard locknut and lockwasher.

7.

Remove two screw assembled lockwashers (Figure 1, Item 19) and brush guard (Figure 1, Item 3) from brush

guard (Figure 1, Item 5). Discard screw assembled lockwashers.

TM 9-2320-272-23-5

0782

0782-2