TM-9-2320-272-23-5

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-5 - Page 145 of 623

INSTALLATION

1.

Install brush guard (Figure 2, Item 3) on brush guard (Figure 2, Item 5) with two screw assembled lockwashers

(Figure 2, Item 19).

2.

Install washer (Figure 2, Item 18) and lamp housing (Figure 2, Item 17) on brush guard (Figure 2, Item 3) with

lockwasher (Figure 2, Item 15) and locknut (Figure 2, Item 14).

3.

Install grommet (Figure 2, Item 4) on leads (Figure 2, Items 6 and 13) and fender (Figure 2, Item 8).

4.

Connect cable (Figure 2, Item 9) to lead (Figure 2, Item 6).

5.

Connect lead (Figure 2, Item 13) and cable (Figure 2, Item 9) to connector (Figure 2, Item 12).

6.

Install protector box (Figure 2, Item 11) on fender (Figure 2, Item 8) and four screws (Figure 2, Item 7) with

four locknuts (Figure 2, Item 10).

NOTE

Ensure red lens of light assembly is installed facing rear of vehicle.

7.

Install lamp (Figure 2, Item 1), two o-rings (Figure 2, Item 16), and lenses (Figure 2, Item 2) on lamp housing

(Figure 2, Item 17).

TM 9-2320-272-23-5

0782

0782-4