TM-9-2320-272-24-1

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 1 OF 4

JUNE 1998

TM-9-2320-272-24-1 - Page 192 of 1015

TM 9-2320-272-24-1

Table 2-3. Electrical Troubleshooting (Contd).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Test 4. Test starter-to-solenoid strap.

Step 1.

Set multimeter to 10-volt range.

Step 2.

Connect multimeter negative lead to positive terminal stud of starter and positive lead

to terminal stud of solenoid.

Step 3.

Crank engine and observe multimeter. A voltage reading exceeding 0.1 volt indicates bad

connection at starter terminal stud and terminal stud of solenoid.

Clean and tighten connections.

2-104