TM-9-2320-272-24-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4
JUNE 1998
TM-9-2320-272-24-2 - Page 223 of 991
TM 9-2320-272-24-2
3-326. WINCH CABLE CLEVIS REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE
MODELS:
All with winch
TOOLS
EQUIPMENT CONDITION
l
Parking brake set (TM 9-2320-272-10).
l
Front winch cable unwound (TM 9-2320-272-10).
l
Cable chain and hook removed (para. 3-325).
General mechanic ’s tool kit (Appendix E, Item 1)
GENERAL SAFETY INSTRUCTIONS
REFERENCES (TM)
l
Wear hand protection when handling winch cable.
TB 43-0142
l
Top seizing must not be less than 5 in. (12.7 cm)
TM 9-2320-272-10
from end of cable.
TM 9-2320-272-24P
WARNING
Wear hand protection when handling winch cable. Broken wires
may cause injury to personnel.
a. Removal
1.
Place threaded sleeve (1) in vise.
2.
Remove clevis socket (2) from threaded sleeve (1).
3.
Remove threaded sleeve (1) from vise, and clamp cable (5) in vise below seizing wire (4), if present.
4.
Remove plug (3), threaded sleeve (1), and seizing wire (4), if present, from cable (5).
5.
Remove cable (5) from vise and trim to provide new end.
3-831
Back to Top
