TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 512 of 991

TM 9-2320-272-24-2

3-435. CONVOY WARNING LIGHT HARNESS (M934A1/A2) REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

APPLICABLE MODELS

REFERENCES (TM)

M934A1/A2

TM 9-2320-272-10

TOOLS

TM 9-2320-272.24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

Parking brake set (TM 9-2320-272-10).

Seven screw-assembled lockwashers

Convoy warning lights removed (para. 3-437).

(Appendix D, Item 576)

Locknut (Appendix D, Item 288)

Two tiedown straps (Appendix D, Item 684)

1.

2.

3.

4.

5.

6.

7.

NOTE

Note routing of harness for installation.

Remove two tiedown straps (3) and harness (4) from two support tubes (2) and van body (1). Discard

tiedown straps (3).

Remove twenty-five screws (5), clamps (6), and harness (4) from van body (1).

Remove four screw-assembled lockwashers (19), washers (20), clamps (21), and harness (4) from van

body (1). Discard screw-assembled lockwashers (19).

Remove five screws (18), clamps (17), and harness (4) from van body (1).

Remove three screw-assembled lockwashers (14), washers (15), clamps (16), and harness (4) from

van body (1). Discard screw-assembled lockwashers (14).

Disconnect harness lead (13) from lead (12).

Remove locknut (11), washer (9), screw (7), washer (9), and ground lead (8) from fuel tank support (10).

Discard locknut (11).

3-1120