TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 504 of 991

TM 9-2320-272-24-2

3-432. CONVOY WARNING LIGHT MOUNT (M929/A1/A2, M930/A1/A2)

REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

APPLICABLE MODELS

M929/A1/A2,

M930/A1/A2

TOOLS

REFERENCES (TM)

TM 9-2320-272-10

TM 9-2320-272-24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

Parking brake set (TM 9-2320-272-10).

Convoy warning light removed (para. 3-437).

Four locknuts (Appendix D, Item 288)

NOTE

Right and left convoy warning light mounts are replaced the same.

This procedure covers the right mount only

1.

Disconnect two cable leads (8) from harness leads (7).

2.

Remove two cable leads (8) from support tube (2) and mounting bracket (11).

3.

Remove wing screw (3) and support tube (2) from mounting bracket (11).

4.

Remove mounting plate (1) from support tube (2).

5.

Remove four locknuts (5), washers (4), screws (10), washers (9), and mounting bracket (11) from cab

protector (6). Discard locknuts (5).

1.

Install mounting bracket (11) on cab protector (6) with four washers (9), screws (10), washers (4),

and new locknuts (5).

2.

Install mounting plate (1) on support tube (2).

3.

Install support tube (2) on mounting bracket (11) with wing screw (3).

4.

Install two cable leads (8) on support tube (2) and mounting bracket (11).

5.

Connect two cable leads (8) to harness leads (7).

3-1112