TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 496 of 991

TM 9-2320-272-24-2

3-430. CONVOY WARNING LIGHT MOUNT REPLACEMENT

THIS TASK COVERS:

a. Removal

INITIAL SETUP:

b. Installation

APPLICABLE MODELS

REFERENCES (TM)

All except M929/A1/A2, M930/A1/A2,

TM 9-2320-272-10

M934/A1/A2

TM 9-2320-272-24P

TOOLS

EQUIPMENT CONDITION

General mechanic’s tool kit (Appendix E, Item 1)

• Parking brake set (TM 9-2320-272-10).

MATERIALS/PARTS

• Convoy warning light removed (para. 3-437).

Five locknuts (Appendix D, Item 309)

Two locknuts (Appendix D, Item 277)

Screw-assembled lockwasher

(Appendix D, Item 575)

NOTE

Left and right convoy warning light mounts are replaced the same.

This procedure covers left convoy waning light mount only.

a. Removal

1.

2.

3.

4.

5.

6.

7.

Disconnect two leads (13) from connectors (14).

Remove screw-assembled lockwasher (12), washer (11), and clamp (10) with cable (22) from bracket (9).

Discard screw-assembled lockwasher (12).

Remove mounting plate (1) and cable (22) from support tube (2).

Remove wing screw (20), pin (21), and support tube (2) from bracket tube (16) and bracket (19).

Remove two locknuts (18), washers (17), U-bolt (6), locknut (5), washer (4), screw (3), and bracket (19)

from bracket tube (16). Discard locknuts (5) and (18).

NOTE

Perform step 6 for vehicles equipped with machine gun mount kit.

Remove two locknuts (18), washers (17), U-bolt (6), locknut (5), washer (4), screw (3), and bracket (19)

from bracket post (23). Discard locknuts (5) and (18).

Remove four locknuts (7), washers (8), two U-bolts (15), and bracket tube (16) from bracket ,(9).

Discard locknuts (7).

3-1104