TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

  TM-9-2320-272-24-2 - Page 492 of 991

TM 9-2320-272-24-2
3-428. 100-AMP VOLTAGE REGULATOR REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
All
TOOLS
EQUIPMENT CONDITION
• Parking brake set (TM 9-2320-272-10).
• Hood raised and secured (TM 9-2320-272-10).
• Right splash shield removed (para. 3-301).
General mechanic’s tool kit (Appendix E, Item 1)
• Battery ground cables disconnected (para. 3-126).
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320-272-24P
a. Removal
NOTE
Tag wires, connectors, and cables for installation.
1.
Disconnect harness connectors (6) and (7) from voltage regulator (8).
NOTE
Assistant will help with step 2.
2.
Remove four nuts (5), washers (2), screws (1), washers (2), and voltage regulator (8) from
floorboard (10).
3.
Remove four screws (3), washers (4), and two brackets (9) from voltage regulator (8).
b. Installation
1.
Install two brackets (9) on voltage regulator (8) with four washers (4) and screws (3).
NOTE
Assistant will help with step 2.
2.
3.
4.
5.
6.
Install voltage regulator (8) on floorboard (10) with four washers (2), screws (1), washers (2), and
nuts (5).
Connect harness connectors (6) and (7) to voltage regulator (8).
Connect battery ground cables (para. 3-126).
Start engine (TM 9-2320-272-10).
Check battery generator indicator on instrument panel to ensure it is in green area. If adjustment is
necessary, notify your supervisor.
3-1100


Back to Top