TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 767 of 991

4-5. POWER

TM 9-2320-272-24-2

FOLLOW-ON TASKS:

• Install transmission-to-transfer case propeller shaft (para. 3-148).

• Install transmission PTC-to-hydraulic pump propeller shaft, if equipped

(para. 3-334).

• Install upper radiator hose and bracket (para. 3-58).

• Install hood assembly (para. 3-275).

• Fill steering system to proper oil level (LO 9-2320-272-12).

• Fill engine to proper oil level (para. 3-5).

• Fill transmission to proper oil level (para. 3-133).

• Close air reservoirs drainvalve (TM 9-2320-272-10).

• Connect battery ground cables (para. 3-126).

• Adjust modulator cable (para. 3-145).

• Adjust accelerator linkage (para. 3-42).

• Fill coolant system to proper coolant level (para 3-53).

CAUTION

Never start a new or repaired engine without

performing run-in starting procedures (para. 4-7).

• Perform engine run-in starting procedures (para. 4-8).

• Start engine (TM 9-2320-272-10), allow air pressure to build up to normal

operating range, and check for leaks. Road test vehicle.

4-85