TM-9-2320-272-24-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 4 OF 4
JUNE 1998
TM-9-2320-272-24-4 - Page 98 of 836
TM 9-2320-272-24-4
5-12. MOUNTING FUEL PUMP TO HOLDING FIXTURE
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M939/A1
TM 9-2320-272-24P
SPECIAL TOOLS
Mounting plate (Appendix E, Item 84)
Ball joint vise (Appendix E, Item 7)
TOOLS
General mechanic’s tool kit (Appendix E. Item 1)
EQUIPMENT CONDITION
l
Fuel pump removed from engine (para. 4-35).
l
Fuel pump shutoff valve removed (para. 4-36 or
4-37).
1.
Remove two nuts (2), screws (5), and fuel pump (3) from mounting plate (1).
2.
Remove two screws (4) and mounting plate (1) from ball joint vise.
1.
Attach mounting plate (1) to ball joint vise and install two screws (4).
2.
Install fuel pump (3) to mounting plate (1) with two screws (5) and nuts (2).
FOLLOW-ON TASKS:
l
Install fuel pump on engine (para. 4-35).
l
Install fuel pump shutoff valve (para. 4-36 or 4-37).
5-92
Back to Top
