TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 322 of 452
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT NOT
READY/AVAILABLE
IF:
16
Before
Side Armor
(Left Side)
a. Inspect door
assembly
(Figure 9, Item 2)
and door frame
(Figure 9, Item 3) for
damaged, loose, or
missing mounting
hardware.
Any armor
panel or door
assembly is
damaged or
mounting
hardware is
loose or
missing.
b. Inspect exterior
surface of door
ballistic glass
(Figure 9, Item 1) for
cracks, scratches, or
pitting.
Cracks,
scratches, or
pitting in the
exterior layer of
door ballistic
glass that
penetrates
through to the
inner layer.
c. Open door and enter
cab. Close door using
grab handle. Ensure
door closes without
binding and latches
correctly (WP 0005).
Door binds or
does not latch.
d. Ensure door ballistic
glass
(Figure 9, Item 1)
can open, close, and
securely lock.
Door ballistic
glass will not
close or lock.
e. Inspect interior
surface of door
ballistic glass
(Figure 9, Item 1)
and windshield
ballistic glass for
cracks, scratches, or
pitting.
Cracks,
scratches, or
pitting on the
interior surface
of the door
ballistic glass or
windshield
ballistic glass.
TM 9-2320-273-10
0025
0025-16
Back to Top
