TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 326 of 452
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT NOT
READY/AVAILABLE
IF:
19
Before
Side Armor
(Right Side)
a. Inspect door
assembly
(Figure 12, Item 4)
and door frame
(Figure 12, Item 3)
for damage or loose
or missing mounting
hardware.
Armor panel or
door assembly
is damaged or
mounting
hardware is
loose or
missing.
b. Inspect exterior
surface of door
ballistic glass
(Figure 12, Item 1)
for cracks, scratches,
or pitting.
Cracks,
scratches, or
pitting in the
exterior layer of
door ballistic
glass that
penetrates
through to the
inner layer
c. Inspect windshield
ballistic glass
(Figure 12, Item 2)
mounting hardware
for damaged, loose,
or missing brackets
and mounting bolts.
Any windshield
ballistic glass
mounting
hardware is
damaged, loose,
or missing, or
mounting bolts
are loose or
missing.
d. Inspect exterior
surface of windshield
ballistic glass
(Figure 12, Item 2)
for cracks, scratches,
or pitting.
Cracks,
scratches, or
pitting in the
exterior layer of
windshield
ballistic glass
that penetrates
through to the
inner layer
e. Inspect exterior
surface of windshield
ballistic glass
(Figure 12, Item 2)
for cracks, scratches,
or pitting.
Cracks,
scratches, or
pitting in the
exterior layer of
windshield
ballistic glass
that penetrates
through to the
inner layer
TM 9-2320-273-10
0025
0025-20
Back to Top
