TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 335 of 452
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT NOT
READY/AVAILABLE
IF:
c. If below low mark on
hot run band, add oil
to bring level to
mid-point of band.
Approximately one
quart will raise level
from bottom line to
middle of band.
1
Figure 17. Transmission Dipstick.
33
After
Winch and
Winch Reservoir
(M916 and
M920)
a. Visually inspect
winch, reservoir
lines, and hoses for
leakage and damage.
Hoses/lines are
damaged. Class
III leaks are
evident.
b. Check fluid level.
Fluid level should be
at full mark on sight.
c. Check cable for
kinks, frays, and
breaks in wire.
Winch cable
frayed, has
kinks that
cannot be
removed, is
broken, or
missing.
d. During operation,
check for oil leakage
and adequate control
response.
No control
response. Class
III leaks
evident.
TM 9-2320-273-10
0025
0025-29
Back to Top
