TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 252 of 801

TM 9-2320-273-34

(21)

Remove shaft (2) and seal ring (1).

(22)

Turn assembly over and remove hub assembly (6) from the case; then remove the bearing

cone from the hub using a punch through holes (5).

to cover

(4).

NOTE

In step (23), scribe bearing retainer and

cover to aid in assembly.

(23)

Turn cover over and remove six bolts (3, fig. 7-70) that hold the rear bearing retainer (2)

(4). Install two 3/8 in. - 16 bolts ( 1 ) in the bearing retainer (2) and force the unit off of cover

(24)

If necessary, remove adapter and washer (6) from bearing retainer (2).

—

Figure 7-70. Remove Rear Bearing Retainer.

7-74