TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 264 of 801

TM 9-2320-273-34

(18)

Use a bearing cup puller to remove the two bearing cups (4).

(19)

If necessary, remove snap ring and spacer located between bearing cups (4).

f.

Remove and Disassemble Front Housing and Brake.

(1)

Install a 3/4-10 NC eyebolt (1, fig. 7-82) in the housing. Fasten a hoist to the eyebolt.

(2)

Remove four bolts and washers (9) and remove cover and gasket (8) from the housing.

(3)

Remove plug (2), plug (5), and orifice plug (4).

LEGEND:

1.

EYEBOLT

6.

2. PLUG

7.

3. GEAR

8.

4. ORIFICE PLUG

9.

5. PLUG

10.

Figure 7-82.

BOLT AND WASHER (17)

BOLT AND WASHER

COVER AND GASKET

BOLT AND WASHER (4)

BOLT AND WASHER (3)

Remove Front Housing.

TA 239531

7-86

Change 2