TM 9-2320-273-34
(4)
Using suitable gear puller remove gear (3).
(5)
Remove seventeen bolts (6) and washers that hold the housing to the main case.
(6)
Remove bolt (7) and washer.
(6.1)
Remove three hidden bolts (10) and washers from outside of housing at the bottom.
WARNING
The housing weighs approximately 50 Ibs
(23 kg). Assistance must be used to pre-
vent personal injury.
(7) Remove the housing.
(8)
Remove eight pins (1, fig. 7-83) from the hub (3). Remove four pins, springs, and
sleeves (2) from the hub (3).
TA 074128
Figure 7-83. Remove Input Shaft.
Change 2
7-87