TM-9-2320-279-10-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

OPERATOR’S MANUAL VOLUME 2 OF 2

DECEMBER 1998

CHANGE 3

TM-9-2320-279-10-2 - Page 108 of 819

TM 9-2320-279-10-2

M984E1 General Operating Procedures (Cont)

f. Stow Rear Beacon Lights.

(1)

(2)

(3)

(4)

CAUTION

Do not let beacon drop when removing screws. Damage

to beacon can result.

NOTE

Right and left beacon lights are stowed in the same way.

Remove two nuts (1), lockwashers (2), washers (3), and screws (4) from

support bracket (5).

Lower beacon support tube (6) until upper set of holes in beacon

support tube aline with holes in support bracket (5).

Install two screws (4) through holes in support bracket (5) and beacon

support tube (6).

Install two washers (3), lockwashers (2), and nuts (1).

2-73