TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-5. VOLTAGE REGULATOR REMOVAL/INSTALLATION (CONT).
a. Removal.
(1)
Remove nut (1) and
lockwasher (2) to
disconnect wire (3) from
voltage regulator (4).
(2)
Remove four screws (5) and
voltage regulator (4) from
alternator (6).
b. Installation.
(1)
Position voltage
regulator (4) on
alternator (6) and attach
with four screws (5).
(2)
Attach wire (3) with
lockwasher (2) and nut (1).
c. Follow-on Maintenance.
(1)
Connect batteries
(para 7-91).
(2)
Test alternator (para 7-2).
(3)
Install engine side panel
(TM 9-2320-279-10).
(4)
Close engine cover
(TM 9-2320-279-10).
END OF TASK
7-6. VOLTAGE REGULATOR ADJUSTMENT.
This task covers:
a. Adjustment
b. Follow-on Maintenance
INITIAL SETUP
Models
References
All
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
Para 7-5
Voltage regulator removed.
None
Special Environmental Conditions
Supplies
None
None
General
Safety Instructions
Personnel Required
None
MOS 63S, Heavy wheel vehicle mechanic
7-10