TM-9-2320-279-20-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 1 OF 3

TM-9-2320-279-20-1 - Page 582 of 985

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-8. STARTER MOTOR REMOVAL/lNSTALLATION (CONT).

(2)

(3)

(4)

Support starter motor (2) and remove

three screws (3) and lockwashers (4).

Remove two screws (5), washers (6),

spacer (7), and locknuts (8) from starter

end support bracket (9).

Pull starter motor (2) forward to remove

it from flywheel housing (10).

6. Installation.

NOTE

Check flywheel ring gear for

broken or damaged teeth before

installing starter motor.

(1)

(2)

(3)

(4)

(5)

(6)

Insert starter motor (1) in

flywheel housing (2).

Install two screws (3),

washers (4), spacer (5), and

locknuts (6) on starter end

support bracket (7).

Secure starter motor (1) with

three screws (8) and

lockwashers (9).

Tighten locknuts (6).

Connect starter motor cables

and solenoid wires.

Tighten screws (8).

c. Follow-on Maintenance.

(1)

Connect batteries (para 7-91).

(2)

Check starter motor operation

(TM 9-2320-279-10).

(3)

Install engine side panel (TM 9-2320-279-10).

(4)

Close engine cover (TM 9-2320-279-10).

END OF TASK

7-14