TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
13-3. STEERING LINKAGE AND UNIVERSAL JOINT
REMOVAL/REPAIR/INSTALLATION/ADJUSTMENT (CONT).
NOTE
Check to see that wheels are
straight before performing
step
(7).
(7)
(8)
(9)
Install yoke (13) on shaft (6)
with screw (14) and
nut (13). Tighten to 35 to
40 lb-ft (48 to 54 N•m).
Install yoke (16) on steering
gear (17) with screw (18)
and nut (19). Tighten to 35
to 40 lb-ft (48 to 54 N•m).
Lubricate steering column
linkage (LO 9-2320-279-12).
e. Adjustment.
(1)
Push down and turn horn button (1)
counterclockwise 1:3 of a turn.
(2)
Remove horn button (1), spring plate (2),
and spring (3) from steering wheel (4).
13-10