TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
a. Removal.
(1)
Remove cotter pin (1).
(2)
Remove nut (2).
CAUTION
(3)
(4)
(5)
(6)
(7)
Threads of socket stud may be damaged if not protected. Put nut part way on
stud.
Tap upward on bottom end of socket stud to disconnect drag link (3) at steering arm (4).
Remove nut (5), lockwasher (6),
and screw (7).
Spread slot in lower end of
pitman arm (8).
Disconnect drag link (3) from
pitman arm (8).
Remove two lubrication
fittings (9) from drag link (3).
13-13