TM-9-2320-279-20-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3

TM-9-2320-279-20-2 - Page 335 of 938

TM 9-2320-279-20-2

Steering System Maintenance Instructions

e.

Installation.

(1)

(2)

(3)

(4)

(5)

Loosen nuts (1) on tie rod end clamps (2).

CAUTION

Tie rod ends must be threaded into tie rod so threads are beyond opening under clamp.

Failure to do so, may result in damage to equipment.

NOTE

Be sure tie rod ends are installed evenly in steering arm.

Turn tie rod ends (3) in or out until ends fit in holes in steering arm (4).

Install tie rod (5 or 6) into steering arm (4) holes.

CAUTION

Tie rod end clamps on number two axle must have nuts and screws on bottom of tie rod to

prevent end clamps from striking shock absorber mount.

Install castle nut (7).

Install cotter pin (8).

Change 2

13-16.3/(13-16.4 blank)