TM-9-2320-279-20-3
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 3 OF 3
TM-9-2320-279-20-3 - Page 20 of 615
TM 9-2320-279-20-3
Supplies
None
Special Environmental Conditions
None
Personnel Required
MOS 63S. Heavy wheel vehicle mechanic
a. Removal.
NOTE
Removal procedure is the
same for both wipers.
(1)
Remove locknut (1) and
screw (2).
(2)
Remove blade (3) from
wiper arm (4).
(3)
Remove nozzle (5) from
hose (6).
(4)
Remove nut (7) and
lockwasher (8).
(5)
Disconnect hose (6) from
nipple (9).
(6)
Remove wiper arm (4).
(7)
Remove hose (6) from wiper
arm (4).
18-2
Body Accessory Maintenance Instructions (Cont)
Section II.
WINDSHIELD WIPER/WASHER MAINTENANCE
Body Accessory Maintenance Instructions
18-2. WINDSHIELD WIPER BLADE AND ARM REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
General Safety Instructions
None
Back to Top
