TM 9-2320-279-34- 1
Electrical Systems Maintenance Instructions (Cont)
6-15. CHASSIS WIRING HARNESS REMOVAL/iNSTALLATION .
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
References
All except M984E1
Non e
Test Equipment
Equipment Conditio n
Non e
Special Tools
Non e
Supplie s
Connector, electrical, butt, Item 31,
Appendix C
Tags, identification, Item 60, Appendix C
Tape, insulation, electrical, Item 62,
Appendix C
Ties, cable, plastic, Item 65, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
TM or Para
Condition Descriptio n
TM 9-2320-279-10 Shut off engine.
TM 9-2320-279-10 Air system drained.
TM 9-2320-279-20 Batteries disconnected.
TM 9-2320-279-20 Work lamps and bracket
removed (M984).
Special Environmental Conditions
Non e
General Safety Instructions
Non e
Level of Maintenance
Direct Support
a. Removal .
NOT E
Tag and mark all wires and connectors.
(1)
Remove four screws (1), lockwashers (2), nuts (3), and trailer electrical connector (4),
(2)
Remove spring cover (5) from mounting bracket (6).
6-10 4