TM 9-2320-279-34- 1
Electrical Systems Maintenance Instructions (Cont)
6-15. CHASSIS WIRING HARNESS REMOVAL/INSTALLATION (CONT).
(17)
(18)
NOT E
Do steps (17) and
(18)
on each side of M984 only.
Remove three nuts (38), lockwashers (39), screws (40), washers (41), three cushion clips (42),
and chassis wiring harness (12).
Remove two screws (43), cushion clips (44), and chassis wiring harness (12).
NOT E
Ž
Chassis wiring harness is attached to crossmembers on frame.
Ž
Harness cable is removed from rear between frame and body toward engine.
(19)
Remove two brake lines (45) and pull chassis wiring harness (12) between crossmember (46) and
frame (15).
6-108