TM-9-2320-279-34-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 1 OF 3

TM-9-2320-279-34-1 - Page 333 of 709

TM 9-2320-279-34-1

Electrical System Maintenance Instructions (Cont)

6-14.

ENGINE WIRING HARNESS REMOVAL/INSTALLATION (CONT).

(18)

Thread two wires (57) to engine shutdown

solenoid (58) and connect to shutdown solenoid

terminal (59) with two nuts (60).

(19)

Route three wires (61) under engine shutdown

solenoid (58) and push slip-on terminals onto

terminals of buffer switch (62).

(20)

Pull together right engine brake wire (63) and its companion wire (64) from harness. Insert

stripped ends of each wire into electrical butt connector (65) and crimp connector to complete

splice.

(21)

Pull together left engine brake wire (66) and its companion wire (67) from harness. Insert

stripped ends of each wire into electrical butt connector (68) and crimp connector to complete

splice.

6-100