TM-9-2320-279-34-3
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS DIRECT SUPPORT AND GENERAL SUPPORT, VOLUME 3 OF 3
TM-9-2320-279-34-3 - Page 21 of 717
TM 9-2320-279-34-3
M977, M985, and M984E1 Crane Maintenance Instructions (Cont)
17-2.
HYDRAULIC HOSES, TUBES, AND FITTINGS REMOVAL/INSTALLATION (CONT).
k. Type 4 Clamp Removal.
Remove screw (l),
lockwasher (2), clamp (3), and two washers (4).
l. Type 4 Clamp Installation.
Install two
washers (4), clamp (3), and lockwasher (2) with
screw (1).
NOTE
Do not remove screw. Screw holding
clamp also holds hoist pivot pin in
place.
m. Type 5 Clamp Removal.
Remove
nut (1) and clamp (2) from screw (3).
n. Type 5 Clamp lnstallation.
Install
clamp (2) on screw (3) with nut (1).
o. Hydraulic Hose and Tube Removal/installation.
●
●
●
NOTE
This part consists of Hydraulic Hose and Tube Indexes, Tables 17-1 through
17-10, and Figures 17-1 through 17-10, to help locate hydraulic hoses and
tubes.
Tag all hoses and components during removal.
This paragraph does not cover outrigger hoses, tubes, and fittings. See
paragraph 17-36 for outrigger leg and paragraphs 17-38 and 17-39 for outrigger
extension cylinder and internal routing.
17-4
Back to Top
