TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 106 of 951

3-45. HAND THROTTLE CONTROL CABLE AND BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

1.

Remove four screws (6) and instrument cluster (7) from instrument panel (3) and pull instrument

cluster (7) away to allow access to speedometer cable (4).

2.

Loosen nut (5) and disconnect speedometer cable (4) from speedometer (1).

3.

Remove hitch pin (19) and washer (18) and disconnect hand throttle clevis (16) from accelerator

rod (17).

4.

Remove locknut (8), washer (9), screw (10), washer (9), and hand throttle cable (11) from bracket

(12). Discard locknut (8).

5.

Remove two locknuts (13), washers (14), capscrews (20), washers (14), and bracket (12) from

cowl (15) Discard locknuts (13).

6.

Loosen nut (25) and hand throttle cable (11) from bracket (23).

7.

Remove locknut (21), washer (28), capscrew (27), and washer (28) from bracket (23) and instrument

panel (3). Discard locknut (21).

8.

Remove nut (22), screw (24), and bracket (23) from instrument panel (3).

9.

Remove setscrew (30) and handle (31) from hand throttle cable (11).

10.

Remove nut (25), O-ring (33), and nut (26) from hand throttle cable (11). Discard O-ring (33).

a. Removal

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 70)

O-ring (Appendix G, Item 212)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-280-24P

TM 9-2320-280-20-2

3-84

Change 3

1

2

3

4

5

6

7