TM-9-2320-280-20-2
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3
JANUARY 1996
TM-9-2320-280-20-2 - Page 98 of 951
TM 9-2320-280-20-2
3-40. LEFT FUEL INJECTION LINES BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Hood raised and secured (TM 9-2320-280-10).
automotive (Appendix B, Item 1)
Engine access cover removed (para. 10-15).
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
a. Removal
1.
Remove screw-assembled washer (2) and clamp (1) from bracket (5).
2.
Remove screw-assembled washer (8) and clamp (9) from bracket (5).
3.
Remove two screw-assembled washers (3) and oil dipstick tube (4) from bracket (5).
4.
Remove two nuts (6), washers (7) and bracket (5) from valve cover studs (10).
b. Installation
1.
Install bracket (5) to valve cover studs (10) with two washers (7) and nuts (6). Tighten nuts (6) to
13-20 lb-ft (18-27 N.m).
2.
Secure oil dipstick tube (4) to bracket (5) with two screw-assembled washers (3). Tighten screw-
assembled washers (3) to 3-4 lb-ft (4-5 N.m).
3.
Install clamp (9) to bracket (5) with screw-assembled washer (8). Tighten screw-assembled
washer (8) to 3-4 lb-ft (4-5 N.m).
4.
Install clamp (1) to bracket (5) with screw-assembled washer (2). Tighten screw-assembled
washer (2) to 3-4 lb-ft (4-5 N.m).
3-76
FOLLOW-ON TASKS:
Install engine access cover (para. 10-15).
Lower and secure hood (TM 9-2320-280-10).
Back to Top
