TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 107 of 951

1.

Install nut (26), O-ring (33), and nut (25) on hand throttle cable (11).

2.

Install handle (31) on hand throttle cable (11) with setscrew (30).

3.

Install bracket (23) on instrument panel (3) with screw (24) and nut (22). Do not tighten.

4.

Align holes in bracket (23), instrument panel (3), and steering column bracket (29) with

washer (28), capscrew (27), washer (28) and locknut (21).

5.

Tighten screw (24) and nut (22).

6.

Install hand throttle cable (11) on bracket (23) with nut (25).

7.

Install bracket (12) on cowl (15) with two washers (14), capscrews (20), washers (14), and

locknuts (13).

8.

Install hand throttle cable (11) on bracket (12) with washer (9), screw (10), washer (9), and

locknut (8).

9.

Connect clevis (16) to accelerator rod (17) with washer (18) and hitch pin (19).

10.

Connect speedometer cable (4) to speedometer (1), ensuring core (2) engages with square hole in

speedometer (1), and tighten nut (5).

11.

Install instrument cluster (7) in instrument panel (3) with four screws (6).

b. Installation

3-45. HAND THROTTLE CONTROL CABLE AND BRACKET REPLACEMENT (Cont'd)

TM 9-2320-280-20-2

Change 3

3-85

23

26

30

31

25

33

11