TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 430 of 951

4-98. CONTROL BOX POWER CABLES REPLACEMENT (Cont'd)

TM 9-2320-280-20-2

4-192

Change 3

9.

Install positive cable (15) and NBC harness cable (16) on control box power stud (18) with

washer (8), lockwasher (9), and locknut (10).

10.

Install ground cable (2) on ground stud (19) with nut (4).

11.

Install two clamps (11), power harness (13), and NBC harness (14) on screw (17) with plain-

assembled nut (12).

12.

Install cover (7) on control box (1) with four lockwashers (5) and screws (6).

13.

Install two clamps (22) and power harness (13) on body (21) with two screws (20).

NOTE

Step 14 applies to M996 and M996A1 vehicles only.

14.

Install five clamps (22) and power harness (13) on body (21) with four screws (20).