TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 490 of 951

4-108. INTERCOM CABLE REPLACEMENT (M997, M997A1, M997A2) (Cont'd)

b. Installation

1.

Install intercom cable (1) on intercom (14).

2.

Route intercom cable (1) in vehicle in approximate mounting location.

3.

Install grommet (10), retainer (11), and wiring harness (8) over yellow tape (9), and intercom

cable (1) on body (6) with two washers (12) and screws (13).

4.

Install two clamps (5.1), intercom cable (1), and wiring harness (8) on body (6) with two

capscrews (5.2) and assembled locknuts (5.3).

5.

Install two clamps (5), intercom cable (1), and wiring harness (8) on body (6) with two screws (4).

6.

Install cover (2), intercom cable (1), and wiring harness (8) on body (6) with three capscrews (7) and

assembled locknuts (3).

7.

Remove three assembled locknuts (3), capscrews (7), and cover (2) from body (6). Discard assembled

locknuts (3).

8.

Remove two screws (4), clamps (5), intercom cable (1), and wiring harness (8) from body (6).

9.

Remove two assembled locknuts (5.3), capscrews (5.2), and clamps (5.1) from body (6). Discard

assembled locknuts (5.3).

10.

Remove two screws (13), washers (12), grommet (10), retainer (11), intercom cable (1), and wiring

harness (8) from body (6).

11.

Remove intercom cable (1) from intercom (14) and vehicle.

TM 9-2320-280-20-2

4-250

Change 3