TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 482 of 951

4-107. INTERCOM CABLE REPLACEMENT (M996, M996A1)

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two tiedown straps (3) from intercom cable (4), power cable (7) and two antenna cables (6).

Discard tiedown straps (3).

2.

Remove capscrew (8), washer (1), clamp (2), two antenna cables (6), and intercom cable (4) from

radio rack (5).

3.

Remove three screws (13), clamps (14), two antenna cables (6), and intercom cable (4) from wind-

shield (15).

4.

Remove capscrew (9), washer (10), clamp (12), intercom cable (4), and two antenna cables (6) from

plate (11).

5.

Remove two screws (22), clamps (23), and intercom cable (4) from body (17).

6.

Remove two assembled locknuts (16), capscrews (21), washers (20), grommet (18), retainer (19), and

intercom cable (4) from body (17). Discard assembled locknuts (16).

INITIAL SETUP

Applicable Models

M996, M996A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Plain-assembled nut (Appendix G, Item 201)

Two assembled locknuts

(Appendix G, Item 130)

Two tiedown straps (Appendix G, Item 307)

Personnel Required

One mechanic

One assistant

Manual References

________________

TM 9-2320-280-24P

Equipment Condition

__________________

Battery ground cable disconnected (para. 4-73).

TM 9-2320-280-20-2

4-242

Change 3