TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996
TM-9-2320-280-20-2

  TM-9-2320-280-20-2 - Page 474 of 951

4-105. ANTENNA CABLES REPLACEMENT (M996, M996A1)
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove two tiedown straps (6) from antenna cables (8), power cable (2), and intercom cable (7).
Discard tiedown straps (6).
2.
Remove capscrew (3), washer (4), clamp (5), two antenna cables (8), and intercom cable (7) from
radio rack (1).
3.
Remove three screws (11), clamps (10), two antenna cables (8) and intercom cable (7) from
windshield (12).
4.
Remove capscrew (14), washer (13), clamp (9), two antenna cables (8) and intercom cable (7) from
plate (15) and windshield (12).
5.
Remove two antenna cables (8) from antenna (16).
b. Installation
1.
Install antenna cables (8) on antenna (16).
2.
Install clamp (9) two antenna cables (8) and intercom cable (7) on plate (15) and windshield (12)
with washer (13) and capscrew (14). Tighten capscrew (14) 6 lb-ft (8 N
•
m).
3.
Install three clamps (10), two antenna cables (8) and intercom cable (7) on windshield (12) with
three screws (11).
4.
Install clamp (5), two antenna cables (8) and intercom cable (7) on radio rack (1) with washer (4)
and capscrew (3). (Tighten capscrew (3) 6 lb-ft (8 N
•
m).
5.
Install two antenna cables (8) on intercom cable (7) and power cable (2) with two tiedown straps (6).
INITIAL SETUP:
Applicable Models
M996, M996A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two tiedown straps (Appendix G, Item 307)
Manual References
TM 9-2320-280-24P
Equipment Condition
Battery ground cable disconnected (para. 4-73).
TM 9-2320-280-20-2
4-236
Change 3


Back to Top