TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 542 of 951

TM 9-2320-280-20-2

4-123. HEATER/VENT SYSTEM CONTROL BOX AND WIRING HARNESS

REPLACEMENT (Cont’d)

13.

Route harness (21) down through grommet (20) into body (22) through battery box grommet (26) and

through hole in tunnel (27).

14. Connect control box lead (3) to fuel pump lead (4).

15. Install fuel pump (16), capacitor (5), and ground terminal (6) on bracket (17) with washer (7),

capscrew (8), washer (2), and locknut (1).

16. Install clamp (9) on harness (10) and install clamp (9) and clamp (13) on body bracket (12) with

capscrew (11), washer (14), and locknut (15).

17. Install grommet (18) on harness (21) and into tunnel (27).

18. Install harness (21) in two clamps (19) on body (22) with two screws (23).

19. Install harness (21) on resuscitator harness (24) with tiedown strap (25).

4-296