TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 554 of 951

4-125. HEAT/VENT CONTROL PANEL REMOVAL (M996, M996A1)

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Remove plug button (1) from control arm (2) and blower duct arm (5). Discard plug button (1).

2.

Disconnect vent door control arm (3) from switch lever assembly (4).

3.

Remove four screws (7), control panel (8), and control arm (2) from body (6).

b. Installation

1.

Connect control arm (2) to switch lever assembly (4) and install control panel (8) on body (6) with

four screws (7).

2.

Connect vent door control arm (3) to switch lever assembly (4).

3.

Install control arm (2) on blower duct arm (5) with plug button (1).

INITIAL SETUP:

Applicable Models

M996, M996A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Plug button (Appendix G, Item 8)

Manual References

TM 9-2320-280-24P

Equipment Condition

• Battery ground cable disconnected (para. 4-73).

• Heater compartment panel removal (para. 11-

204).

TM 9-2320-280-20-2

4-308

Change 3