TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 652 of 951

6 - 9 . HALFSHAFT MAINTENANCE (Cont’d)

TM 9-2320-280-20-2

6 - 2 2

Change 2

NOT E

• Perform steps 13 and 14 for all models except M1097, M1123,

and “A1” and “A2” series vehicles.

• Perform steps 15 and 16 for M1097 and “A1” series vehicles.

• Perform steps 16.1 through 16.5 for M1123 and “A2” series

vehicles.

1 3

.

Install spacer (3) and retainer ring (2) on shaft (4).

1 4

.

Align splines of inner race (1) with open spline of shaft (4). Use press to install inner race (1) until

it

snaps in place.

1 5

.

Align splines of inner race (1) with open spline on shaft (4). Use press to install inner race (1) on

shaft (4) until inner race (1) seats into place.

1 6

.

Install retainer ring (6) in upper groove of shaft (4) behind inner race (1).