TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 677 of 951

TM 9-2320-280-20-2

6-18. FRONT GEARED HUB VENT LINE REPLACEMENT (Cont’d)

2. To fabricate front vent line hose (4), cut 33.63 in. (85.42 cm) piece of hose from bulk.

3. Route front vent line hose (4) through four existing clamps (3), and secure with two hose clamps (6)

to tee fitting (1) and elbow (5).

4. Position 9.0 to 10.0 in. (22.9 to 25.4 cm) of hose (4) between two existing clamps (3). Secure existing

clamps (3), as noted in removal, with screws (7).

5. Install new clamp (3) on front vent line (4), and control arm (2) at hole (9) with screw (10),

washer (11), and nut (12).

6-45