TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 679 of 951

TM 9-2320-280-20-2

6-18. FRONT GEARED HUB VENT LINE REPLACEMENT (Cont’d)

4. Position 11.5 to 12.5 inches (29.2 to 31.8 cm) of hose (1) between two existing outer clamps (2) and

secure existing clamps (2) with screws (3). Ensure center clamp (2) is positioned as shown.

5. Bend 90° bracket (14) on geared hub (7) 30° outward as shown.

NOTE

Do not close loop on clamps installed on control arms. Hose lines

should move freely through control arm clamp loops.

6. Install new clamp (13) on vent line hose (1), and control arm (8) with screw (10), washer

nut (11).

(12), and

FOLLOW-ON TASK: Install wheel (para. 8-3).

6-47