TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 839 of 951

TM 9-2320-280-20-2

8-11. REAR WHEEL TOE-OUT ALIGNMENT (Cont’d)

12.

13.

14.

Measurement must be 0-118 in. (0-3 mm). If measurement is not within specifications, perform

step 13. If measurement is within specifications. proceed to step 14.

Loosen two locknuts (2) securing clamps (9). Turn adjusting sleeve (10) until measurement is within

specifications. Roll vehicle forward then rearward and repeat steps 10 through 12 to ensure correct

adjustment.

Repeat steps 10 through 12 for opposite side.

15.

Proceed to task b.

8-39